长沙按摩-长沙按摩_主页

在滁州酒店晚上怎么叫服务

Hotline:

thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six



National Service Hotline: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Shenzhen: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Suzhou: fifteen billion eight hundred and sixty-two million six hundred and eighty-three thousand five hundred and sixty-four

QQ: one billion four hundred and ninety-three million seventy-nine thousand and eleven

WeChat: secyao

Email: 1493079011@qq.com

 Hot melt glue automatic dispensing machine

[brand] Xinhua automation

[model] XH-300F/400F/500F

[application] Touch screen, touch screen, touch screen and so on

[applicable glue] Hot branch packing glue

[glue ratio] One component

[glue output] Minimum 0.01g

[features]

Product overview

1、 Hot melt glue dispenser xh-300f / 400F / 500F process application:

It is applied to the dispensing process of mobile phone touch screen, tablet computer touch screen, navigator touch screen, learning machine screen and other products. Place 30ml hot melt glue cartridge in special heater. After the glue melts, set the glue output and dispensing path, and the manipulator can complete various touch screen dispensing operations automatically.

2、 Hot melt glue dispenser xh-300f / 400F / 500F product features:

1. 30cc pin cylinder hot melt adhesive is directly put into the fixed heating cylinder, and the glue is directly used after melting, which is simple and convenient;
2. It is equipped with advanced and stable glue heating device
3. The machine imitates the human hand to carry on the accurate spot, the line drawing or the arc spot gluing operation on each kind of plane, curved surface or 3D surface automatically;
4. The operation and programming are very simple. You can also directly import the dispensing CAD drawing into the dispensing teaching box. Without programming, the staff can learn how to use the machine in half an hour;
5. The whole machine is easy to install, with high body strength, more stable operation, high perpendicularity of XYZ three axes, and easier product array;
6. The machine has a large storage capacity, which can save 9999 groups of files, and can also be connected with the computer, and the stored files can be backed up to the computer;
7. The fuselage panel has the function of starting point correction, which can work independently without the teaching box, so as to facilitate the management of equipment by the factory;
8. Matching with the dispensing controller imported from South Korea, the quantitative is more accurate and the glue output is more stable;
9. The machine is equipped with a suction function to prevent the leakage of low viscosity glue.
10. It has the function of glue preheating, which can greatly shorten the glue changing time
11. Use Omron temperature control meter to control temperature: ± 1 ℃
12. Suitable for lotai 3542, fule 9646, 3M 2665, ITW 94167 and other hot melt adhesives
 

3、 Relevant parameters of hot melt glue dispenser xh-300f:
 

Moving range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm
Dimensions 500 x 580 x 610mm 600 x 680 x 610mm 700 x 780 x 610mm
Body weight 36kg 40kg 50kg
Maximum running speed
() is the setting range
10. Y axis 600mm / sec (6-600)
Z axis 300 mm / sec (6-300)
Position repetition accuracy ±0.02mm
temperature range 25.0~120.0℃
control accuracy ±1℃
Distance between Z-axis and worktable 140mm
Standard table size 240mm * 200mm, hole position M4, spacing 40mm * 40MM
Exercise mode XYZ three axis three linkage
Driving mode Stepping system
Transmission mode Synchronous belt + precision linear slide rail
safety protection Photoelectric sensor
Programming mode Hand held teaching programming
Programming speed Low / medium / high speed (x, Y-axis 0.1-600mm / sec, z-axis 0.1-300mm / sec, adjustable)
Operation interface Chinese (Simplified) / English can be freely switched
Interpolation function Point / line / arc / 3D trajectory
Glue test function Separate button test glue
I / 0 signal 4 Inputs / 4 Outputs
XY / Z load 8kg/2kg
Equipment power Less than 500W
Power requirements AC220V±10%/AC110V±10%,50/60Hz
Air source requirements 0.5-0.7mpa, dry gas source
ambient temperature 0 ~40℃
Program import and export data line
How to save files Number plus letter (8 digits)
Equipment management mode The control handle can work offline
Installation of dispensing head Universal fixed motherboard
Fixing bracket Both sides of the machine are installed with brackets to place the teaching box and glue quantity controller
Glue melting mode heating
Heating temperature range 0-200 degrees adjustable
Suitable for glue packaging 30cc syringe


Xinhua hot melt adhesive automatic dispensing machine one year free warranty, on-site training, hotline: 13632963446 Click here to send me a message

Product Name:

corporate name:

contacts:

contact number: 在滁州酒店晚上怎么叫服务