武汉夜总会旗袍美女-武汉夜总会旗袍美女_第1页

在滁州酒店晚上怎么叫服务

Hotline:

thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six



National Service Hotline: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Shenzhen: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Suzhou: fifteen billion eight hundred and sixty-two million six hundred and eighty-three thousand five hundred and sixty-four

QQ: one billion four hundred and ninety-three million seventy-nine thousand and eleven

WeChat: secyao

Email: 1493079011@qq.com

 Automatic dispensing machine for structural adhesive

[brand] Xinhua automation

[model] XH-300J/400J/500J

[application] It is used to dot AB glue on horn, motor bearing bush, mobile phone screen, tablet computer screen, learning machine screen, etc

[applicable glue] AB structural adhesive

[glue ratio] 1:1,2:1,4:1,10:1

[glue output] Minimum 0.01g

[features]

Product overview

1、 AB structure glue dispensing machine xh-300j / 400j / 500J process application:

It can be used for sealing network cable connector, small horn, motor bearing bush, mobile phone screen, tablet computer screen, learning machine screen, etc. The machine is equipped with a syringe type double liquid quantitative glue control system, which can realize the 1:1,1:2,1:4 of needle cylinder packaging, 1: With the help of automatic motion control platform, it can replace the manual work of rapid dot, line drawing and circle drawing on all kinds of flat or curved surface products. It has the characteristics of high precision and good repeatability. It can fully realize the automatic dispensing operation for you and solve the low efficiency of manual dispensing Low quality and other problems.

2、 AB structure glue dispensing machine xh-300j / 400j / 500J product features:

1. According to the customer's glue proportion, we can customize the adhesive gun device of AB flashlight, which is suitable for 1:1ab double liquid glue, 2:1ab double liquid glue, 4:1ab double liquid glue, 10:1 needle cylinder type AB glue;
2. Special AB glue static mixing pipe can perfectly realize the automatic mixing of two kinds of glue;
3. According to the glue quantity of the customer's products, different specifications of the needle can be installed to achieve the size and thickness of the adhesive tape required by the product
4. The machine imitates the human hand to carry on the accurate spot, the line drawing or the arc spot gluing operation on each kind of plane, curved surface or 3D surface automatically;
5. Operation and programming are very simple, half an hour can learn to use the machine;
6. The whole machine is easy to install, with high body strength, more stable operation, high perpendicularity of XYZ three axes, and easier product array;
7. The machine has a large storage capacity, which can save 9999 groups of files and can also be connected with the computer, and the stored files can be backed up to the computer;
8. The fuselage panel has the function of starting point correction, which can work independently without the teaching box, so as to facilitate the management of equipment by the factory;
9. With Korean Panshi precision glue quantity controller, the quantitative is more accurate and the glue output is more stable;
10. The machine has the function of suction, which can prevent the leakage of low viscosity glue;
11. Different sizes of dispensing syringes and needles can be selected according to the requirements of dispensing process.
12. Machine capacity is high, one machine can save 5 to 6 labor.
 

3、 AB structural adhesive dispensing machine xh-300j / 400j / 500J technical parameters:
 

Moving range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm
Dimensions 500 x 580 x 610mm 600 x 680 x 610mm 700 x 780 x 610mm
Maximum running speed
() is the setting range
10. Y axis 600mm / sec (6-600)
Z axis 300 mm / sec (6-300)
Position repetition accuracy ±0.02mm
Distance between Z-axis and worktable 140mm
Standard table size 240mm * 200mm, hole position M4, spacing 40mm * 40MM
Exercise mode XYZ three axis three linkage
Driving mode Stepping system
Transmission mode Synchronous belt + precision linear slide rail
safety protection Photoelectric sensor
Programming mode Hand held teaching programming
Programming speed Low / medium / high speed (x, Y-axis 0.1-600mm / sec, z-axis 0.1-300mm / sec, adjustable)
Operation interface Chinese (Simplified) / English can be freely switched
Interpolation function Point / line / arc / 3D trajectory
Glue test function Separate button test glue
I / 0 signal 4 Inputs / 4 Outputs
XY / Z load 8kg/2kg
Equipment power Less than 500W
Power requirements AC220V±10%/AC110V±10%,50/60Hz
Air source requirements 0.5-0.7mpa, dry gas source
ambient temperature 0 ~40℃
Program import and export data line
How to save files Number plus letter (8 digits)
Equipment management mode The control handle can work offline
Installation of dispensing head Universal fixed motherboard
Fixing bracket Both sides of the machine are installed with brackets to place the teaching box and glue quantity controller
Suitable glue proportion 1:1  2:1  4:1  10:1
Suitable for glue packaging 50cc syringe
Glue mixing method Static mixing
Glue cut-off method Precision Y-type globe valve
Weight of the machine 35kg 40kg 46kg


Xinhua AB structural adhesive automatic dispensing machine one year free warranty, on-site training, hotline: 13632963446 Click here to send me a message

Product Name: 在滁州酒店晚上怎么叫服务

corporate name:

contacts:

contact number: