北京包鸡过夜步骤-北京包鸡过夜步骤_主页

在滁州酒店晚上怎么叫服务

Hotline:

thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six



National Service Hotline: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Shenzhen: thirteen billion six hundred and thirty-two million nine hundred and sixty-three thousand four hundred and forty-six

Suzhou: fifteen billion eight hundred and sixty-two million six hundred and eighty-three thousand five hundred and sixty-four

QQ: one billion four hundred and ninety-three million seventy-nine thousand and eleven

WeChat: secyao

Email: 1493079011@qq.com

You Are Here: home page > Company news

How to clean dispensing machine parts?

Release time: October 23, 2019 10:19:46 source: http://1xuewen.com
 How to clean dispensing machine parts?

1、 Dispenser Needle: bending or wear of needle and stopper may be critical to dispensing quality
 To influence. If the temperature is high or if it is not cleaned for a long time, the adhesive may be fixed on the inner surface of the needle
 If blocking is caused by chemical or semi curing, check the dispensing needle regularly, and clean up in time in case of contamination. The needle
 Immersion of the head in a compatible solvent is a common method of removing all uncured by immersion alone
 If the power is too low, high pressure spray with compatible solvent can be used to blow the glue out of the inner hole of the needle
 Then blow the inner hole with dry compressed air to make the needle dry.


2. Metal formwork: Dispenser In order to prevent the cleaning agent from corroding the patch adhesive of the template and screen,
 First use the pre cleaning process, and then select stronger cleaning agent, technical operation, to prevent the cleaning agent and
 The contact of the patch adhesive, and then use the ordinary cleaning agent to clean the template.


3. Plastic formwork: electrostatic discharge may occur during cleaning of plastic formwork. So we need to use it
 Special anti-static cleaner to prevent this phenomenon. Do not use dishcloth to clean the craft together
 Clean, because the plastic is easy to be scratched, for a long time, this may cause printing quality problems.